libertyc wrote:
>
> Hello group - I'm about to diagnose a severe battery drain problem and
> want to make sure that I am approaching it correctly. If I attach an ohm
> meter in series between the + battery post and the + cable, I should see
> no reading (with car and accessories off). I do. So, I am going to use
> the wiring diagram and disconnect circuits one at a time until I see no
> flow. Then I will try to narrow it down until I find the culprit. Is
> this the correct method??
>
> Carl Huppert
Seems like your approach will work. I would first remove the fuses one
at a time. This would lead you to the group of circuits. Then work each
wire one at a time.
Vic Whitmore
76 Spitfire
Thornhill, Ontario
|