Shane,
They are cheap enough that when I did it a year ago, I bought a set of std,
.005 OS and .010 OS. That way I was sure that when I had the pan off, I
would have the right parts. As it turned out, I used one STD and one .005.
Hugh Barber
'73 TR-6
At 10:17 AM 8/27/97 PDT, Shane F. Ingate wrote:
>Clark Nicholls wrote:
> > Come on, people. Replacing the Thrust washers isn't that big a deal
>
>With all that has been written on replacing thrust washers, I feel
>confident enough to tackle this job this Autumn.
>
>My question is, what size washer do I order? I'll be replacing
>big-end as well, and will have to wait till I drop the pan and make
>some measurements to determine the size of big-end bearing I need.
>But what size thrust-washer do I need?
>
>Thanks in advance,
>
> Shane Ingate, neophyte-mechanic in San Diego
>
>
|