If you are repainting the whole car such as a frame off job, the easiest
way is to heat the metal on the opposite side and scrape it off when soft.
This destroys the paint completely, but what better way to paint a car than
working your way up from the metal.
Bob Kramer, Austin TX
Hill Country Triumph Club
TR6x3, TR250 x3, TR3A vintage race
rgk@flash.net
----------
> From: Kenneth Brown <kbrown@trmx3.dot.ca.gov>
> To: triumphs@autox.team.net
> Subject: Brake Servo
> Date: Wednesday, August 27, 1997 6:18 PM
>
> The recent thread on undercoatings has me wondering.........what is the
easiest
> way to remove it? I know someone on the list recommended oven cleaner but
that
> didn't work (removed the dirt and grease but little else). I wire
brushed the
> inside of one of my fenders, went very fast but was very messy. Any other
> recommendations?
>
> Thanks in advance,
> Ken
> TR250
|