On Mon, 28 Jul 1997, Ken Streeter wrote:
> I have a 70 & 74 TR6, and both suffer from this
> problem, putting my clutch engagement practically
> at the floor.
>
> How do people typically fix this properly? The
> holes in both the pushrod and the clutch pedal
> have been "elongated" on my cars.
I looked at this for my car - fortunatly the other fixes meant I did not
have to do anything about it. I had decided to take it to a machine shop,
and have them fill the hole by welding or some other method, and then
install a bushing. One would of course have to measure carefully first to
make sure the hole went in the right place.
Seems like this might be a nice cottage industry for someone with time
on their hands - there must be lots of these pedal boxes outhere worn to a
nubbin.
______________________________
Dr. Mark Clark
Oregon Institute of Technology
|