At 07:41 AM 5/29/97 -0400, Angelo Graham wrote:
>Hello listers:
>
>Just removed the driveshaft from the 3A and can feel the slightest bit of
>play in the universal joints. As everything is out, thought it would be a
>good time to replace. Has anyone tried to source 3A universal joints
>through any local auto parts suppliers? UAP, NAPA or the like? With
>universals, thought it might be the case that there might be some cross
>reference to other makes that used that joint.
>Thought I would try locally before sending something off to one of the LBC
>suppliers. Thanks for any info or help.
>
>Angelo Graham
>1959 TR3A
>Waterloo, Ont. Canada
>
Hello Angelo
The u joint for the TR3 is also the same as for TR4 and TR6. All parts
houses can get them. I use Precision part # 344. I also discovered part #
344AG will work. The cups are slightly longer and it is about $5 less.
Sam Haynes
59 TR3 Original owner>
|