triumphs
[Top] [All Lists]

Re: Turn signal replacement.

To: Barry Schwartz <Bschwartz@encad.com>
Subject: Re: Turn signal replacement.
From: Andrew Mace <amace@unix2.nysed.gov>
Date: Fri, 23 May 1997 12:00:52 -0400 (EDT)
Cc: Scions of Stanpart <triumphs@Autox.Team.Net>
On Fri, 23 May 1997, Barry Schwartz wrote:

> Well Lucas strikes again!  My turn signal switch ( part no. 158966 )  on the
> GT (same as Spitfire) gave up the ghost...
> is this going to require the removal of the steering column
> (god forbid) or can I simply remove the small cover on the bottom of the
> column to gain access to the wires?

Barry, by far it's easiest to slacken the column at the dashboard and 
undo and remove the "conduit". The whole job shouldn't take more than 1/2 
hour or so. I've tried jamming the wires through without loosening things 
up beforehand; it's not worth the effort!

--Andy

* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and                *
*   10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register                  *
* amace@unix2.nysed.gov                     *
* * * * * * * * * * * * * * * * * * * * * * *


<Prev in Thread] Current Thread [Next in Thread>