On the TR6 spin-on filter adaptors with the hoses to a remote oil cooler does
anyone know which hose is the output to the cooler and which is the return
from
same? I have one on my TVR with a bypass thermostat in the lines and I want
to plumb in an Accusump for use in high speed events but I don't remember if
the output line is the upper hose or the lower as the adaptor is mounted on
the
engine.
I suppose I could remove the thing but someone out there has one handy or a
better memory than me. Also- does the oil flow from the pump to the filter
or
the cooler first? I suspect it would go to the filter first to keep dirty
oil out of
your cooler. Is this "flow" chart correct:
pump>>outside of filter>>inside of filter>>oil cooler>>block>>pan>>pump
Larry Bickel
ljbtvr@aol.com
Lancaster, PA
'68 GT6, my racer
'71 TVR 2500, my street car and sometimes racer
'85 Dodge Van
'83 Chevy S10
'80 Yamaha 650
|