Ron,
My 2 cents worth.
When I recently reassembled my '58 TR3 engine I used Permatex Aviation
Form-a-Gasket number 2 (non-hardening) gasket sealer. Cheap and available
everywhere (at least in the states!). I coated both sides of all the
gaskets, (except for the manifold gaskets). I haven't installed this engine
yet so can't say for sure that I'm leak free. However, when I rebuilt my '57
TR3 30 plus years ago, I used the same sealer for everything!. I had no
problems.
Good luck!
Jim Bauder
Palo Alto, CA
'58 TR3 in boxes
|