At 03:11 PM 2/17/97 -0500, you wrote:
>A quick Saturday afternoon job of replacing the inner/outer door seals on my
>wifes TR6 has become a rebuild of the window mechanisms.
>
>Since the water curtains inside the doors were totally crumbled I don't have
>a clue how exactly they worked.
>
>1) Does anyone stock these things?? (TRF, VB, Moss - NOT)
>
>2) Any suggestions on how to make do.
>
>3) Any suggestions on how to install
>
>Next - remainder of window stuff looks straight forward (Yeah RIGHT) Any tips
>on replacing the window channels - the mechanism is in good shape the
>channels are shot, and now the glass is jumping out of them. (funny how one
>thing leads to another)
>
>Tips, Pointers and Prayers greatfully accepted.
>
>Thanks,
>JoeSimcoe
>(with too many projects underway)
>
>The Haynes manual shows a tool for installing the clips you can make out of
a strip of thick shimstock or thin steelI used a gummy mastic in the loop of
the thing to further hold the clip in place. After youve done a couple its
pretty easy.
|