I believe the heads from the 2000 and 2500 six cylinders are
interchangeable. There are a few problems with the early 2000 heads. They
are very poor breathing and this problem was fixed when the move was made
to go the 2500 in the 250 and 6 ranges. So aside from that small problem,
they should bold up just fine.
Aaron Johnson
72 TR6 CC84967
----------
> From: Henry Frye <thefryes@iconn.net>
> To: Brian Young <byoung@otago.ac.nz>
> Cc: triumphs@autox.team.net
> Subject: Re: cylinder head interchangeability
> Date: Tuesday, January 14, 1997 6:55 AM
>
> Brian Young wrote:
> >
> > Hello everyone,
> >
> > Recently someone posted a list of the different types of heads for
> > 2000 and 2500 motors.
>
> Snip
>
> > Does anyone
> > know if these heads can be interchanged and, if so, should I expect
> > any difference in performance.
> >
>
> End of Brian's Message
>
>
>
> Brian,
>
> If I were you I would email your question to Nick in Nor Cal, the person
> who had an informal survey running on the list. Unfortunately, (for all
> of us) he unsubscribed. (I think. Nick... oh Nick... where are you... )
>
> Try him at Nickbk@aol.com
>
> Or, does someone else want to take a stab at this one???
>
> Good Luck,
>
> Henry Frye
> thefryes@iconn.net
> TR250's
|