| To: | jfcowan@sj.znet.com, triumphs@autox.team.net, british-cars@autox.team.net |
|---|---|
| Subject: | Re: TR-3A clutch slave cylinder return spring |
| From: | EPaul21988@aol.com |
| Date: | Wed, 8 Jan 1997 00:34:53 -0500 (EST) |
REGARDING THE SPRING ATTACHMENT CLUTCH SLAVE My 59 TR 3 attaches on the clutch operating shaft anchor plate and to a purpose drilled hole on the slave cylinder mounting bracket. The side of the spring with a longer straight end goes here. YES it pulls forward. I believe there is only one spring for either Lockheed or Girling since the distance from the clutch operating shaft to the mounting plate is the same with either set up. Also Moss lists one part number - 329-485. |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: TR6 Interior Door Pull, ArthurK101 |
|---|---|
| Next by Date: | Re: Non-LBC content, McGaheyRx |
| Previous by Thread: | TR-3A clutch slave cylinder return spring, John Cowan |
| Next by Thread: | TR6 Differential Overhaul, David Stauffacher |
| Indexes: | [Date] [Thread] [Top] [All Lists] |