triumphs
[Top] [All Lists]

Re: Throw-out Bearing

To: triumphs@autox.team.net
Subject: Re: Throw-out Bearing
From: Catpusher@aol.com
Date: Sat, 30 Nov 1996 22:08:28 -0500
Cc: WDKLINE@aol.com
>From your note you used a TR4A/6 TOB designed  for the later diaphram clutch
on an earlycoil spring TR2/4 coil spring/ finger clutch.  This is one reason
that I like TRF's using factory part numbers to help keep track of part
changes.  If you did the switch recently I hope you saw my note about pinning
the TOB yoke to the cross shaft.
                                   Good Luck from a TR3 Racer!

<Prev in Thread] Current Thread [Next in Thread>