triumphs
[Top] [All Lists]

Some exp: TRF vs Moss vs VB vs Rimmers

To: triumphs@autox.team.net, JoeSimcoe@aol.com
Subject: Some exp: TRF vs Moss vs VB vs Rimmers
From: oehrle@lsil.com (Gary Oehrle)
Date: Sun, 15 Sep 96 07:49:32 PDT
when I did my TR3, the front fender repair panels were 3/4 "
short in width.  beyond this the quality was good and made
right.

other parts I have orderdred, I go more on availabilty then cost.

I have no exp with Rimmers parts and must mostly  TRF and MOSS.

Gary Oehrle
> From autox.team.net!triumphs-owner@mhbs.lsil.com Sun Sep 15 07:21:31 1996
> X-From: Umail1 Sun Sep 15 07:20 PDT 1996
>   (8.6.12/IDA-1.6 for <oehrle@lsil.com>); Sun, 15 Sep 1996 07:19:58 -0700
> From: JoeSimcoe@aol.com
> Date: Sun, 15 Sep 1996 10:19:30 -0400
> To: triumphs@autox.team.net
> Subject: TRF vs Moss vs VB vs Rimmers
> Sender: owner-triumphs@triumph.cs.utah.edu
> Reply-To: JoeSimcoe@aol.com
> Content-Length: 375
> 
> I am rebuilding a TR250 and need to buy some body parts - I have my own
> opinions on the differing quality of parts from the above vendors when it
> comes to cosmetic stuff - but my question is:
> 
> Is there any difference in quality among these vendors when it comes to stuff
> like Floor Pans, Sills, and other metal body parts? ? ? 
> 
> Opinions please . . . . 
> 
> Thanks,
> JoeSimcoe
> 
> 
> 

<Prev in Thread] Current Thread [Next in Thread>
  • Some exp: TRF vs Moss vs VB vs Rimmers, Gary Oehrle <=