Chris-
You ask about a Weber manifold for the GT6 and GT6+ cars...
Never seen one for the GT6, but have one for GT6+. Major clearance problem
between carbs and hood (bonnet). The front manifold (it comes as 3 seperate
pieces), drops down about 2.5" for clearance. The center unit drops about
1.5", and the rear unit is straight out from the head (no clearance problem
at the back). The late TR6 manifold will bolt on, but you won't be able to
close the hood !
Now if I could just get "clearance" the driver...
Nick in Nor Cal
|