Hi, Sebastien, and welcome.
Replacing an outer front wing (fender, 1/4 panel) on a TR-6 is really
pretty straight forward. The panel is bolted in place at it's edges,
you can easily see the bolts along the top when you open the bonnet
(hood). There are also bolts at the front, along the rocker panel and
if I remeber correctly at the door opening. Look around a bit and I'm
sure you can find them all. When I took mine off I also removed the
bonnet and doors, and the rear wings, boot lid, and rocker panels, but
that's a long and tedious story. I think you can remove the front wing
without removing the bonnet and door, but having never done it, I can't
say for sure.
The headlight nacelle, or bucket is a seperate piece and does NOT come
with the wing, but can usually be had at a reasonable price at swap
meets and such.
Have fun,
Tom Gentry
tgentr@rw1.rworld.com
Life is too short to drive boring cars!
|