"Doug Mitchell" wrote:
> On Jul 26, 10:46pm, Steve Sutton wrote:
> > Can anyone tell me the correct routing for a Overdrive equippedTR-6 (LHD)
> > speedo cable?
> The important thing about the routing of the cable is to not have any
> kinks in it. This is what can cause hunting and bouncing of your speedo.
> It doesn't do the cable any good either.
Along these same lines, I've heard tell that there is a "right-angle" drive
available for the speedo cable on the TR6, so that the speedo cable doesn't
have to make a 90-degree bend in the confined space between the transmission
and the tranny tunnel cover/floor pans. My cable takes a sharp bend at that
point, that I think may be responsible for speedo bounce. (My speedo
bounce is negligible at 10-30mph, but pretty major at 50+.)
--ken
'74 TR6 Daily Driver
Kenneth B. Streeter | EMAIL: streeter@sanders.com
Sanders, PTP2-A001 |
PO Box 868 | Voice: (603) 885-9604
Nashua, NH 03061 | Fax: (603) 885-0631
|