triumphs
[Top] [All Lists]

Re: TR6 Clutch release fork pin fix

To: DANIELS@alchem.chem.tamu.edu, triumphs@autox.team.net
Subject: Re: TR6 Clutch release fork pin fix
From: TR6Massey@aol.com
Date: Wed, 27 Mar 1996 21:01:30 -0500
In a message dated 96-03-26 21:50:22 EST, DANIELS@alchem.chem.tamu.edu (Lee
Daniels, daniels@tamu.edu) writes:

>TR6Massey@aol.com wrote:
>>Many cars over here on this side of the pond have the fork welded to the
>>shaft because the car was worked on by someone not familiar with British
>cars
>>or know of part sorces for same.  
>
>Ummmm, there was a *dealer* fix (maybe not factory-autorized) that involved
>just welding it up.  Of course, maybe our Triumph dealers were "not
>familiar with British cars".  Anyway, mine was found to be welded up when I
>pulled the tranny, and I suspect that it will last longer than the gears
>will.  Why go to all the trouble of putting in a new fork pin when it will 
>*not* be as reliable as the weld-it solution?
>
>Lee M. Daniels  

Because it is not concours, of course.

Dave

<Prev in Thread] Current Thread [Next in Thread>