>>>"Jon Moody (BME)" said:
>
> I vaguely remember someone having problems when they removed the seat
> rails from the floorpans of their TR6 - I think the bolts dropped into the
> chassis. I am attemping to remove the carpets from my car this weekend. I
> havent looked at my car yet to see where the seat rails bolt to. Are
> there any caveats I should be aware of when doing this operation? Thanks.
The bolts go in through the top of the rail into the floor. Some of mine have
nuts welded to the underside of the floor pan -- which I suspect is authentic
-- and some have loose nuts.
One of my loose nuts is directly above the frame rail, and there is a hole in
the rail under it. I used a 7/16 deep socket through the hole and the nut
dropped into the socket. No problem.
Getting it back together was a *little* trickier...
--berry
Berry Kercheval :: kerch@parc.xerox.com :: Xerox Palo Alto Research Center
|