triumphs
[Top] [All Lists]

Re: TR6 suspension sag

To: kerch@parc.xerox.com, emanteno@usa.pipeline.com
Subject: Re: TR6 suspension sag
From: TR6Massey@aol.com
Date: Mon, 18 Mar 1996 05:25:18 -0500
Cc: triumphs@autox.team.net
To Berry et al:

There are three different trailing arm brackets used over the years with
different offsets.  Selection and orientation of these brackets sets camber
in the rear end.  These are marked with notches on the top side of the
bracket; either 1, 2 or 3 notches.  There was an article about this in either
the VTR periodical or the 6-Pack newsletter.  I don't recall the details but
give me a day or two and I'll look it up.

Dave

<Prev in Thread] Current Thread [Next in Thread>