triumphs
[Top] [All Lists]

Re: spit axels - paint

To: triumphs@autox.team.net, tom.omalley@channel1.com (Tom Omalley)
Subject: Re: spit axels - paint
From: "Kurt Oblinger" <Kurt_Oblinger_at_AWP450@mail.hq.faa.gov>
Date: Mon, 11 Mar 96 17:18:32 EST


>I have 5 Spit 1500 rear axles sitting in garage.  I plan to
>refurbish those that are serviceable and install them on
>my car(s).  Recently I noticed that 4 of these axles have
>a dab of yellow paint on the inside flat surface of the inner
>yoke (or flange). 1 axle has a dab of blue paint here.
>I know that '73 and later axles are an inch longer.  All
>my axles are the same (longer) length.  It is possible,
>I suppose that the (odd) flange I have, was not originally
>mated to the same axle.  Does anyone know  what
>these paint marks signify?


>  Bob...the original axel from my '74 does indeed have the "dab
>  of yellow paint" on it, if that helps at all.  I'll check
>  the two currently on the car as soon as I dig it out. :-(


The dab or blotch of paint is most likely an inspection proof mark. The 
inspectors on the line would QC the work and then use a paint marking pen 
to put a "stamp of approval" so to speak. There was another comment as to 
colored paint stripes on coil springs. This may be either an inspection mark or
a way of indicating the load rating of the spring. I'm not sure if Triumph
used different rated springs for export as opposed to home market but its 
possible. If so, I would think it would show in the parts manuals.

Cheers 
Kurt Oblinger
Redondo Beach Ca.


Regards...Tom O'Malley
'74 Spit


<Prev in Thread] Current Thread [Next in Thread>
  • Re: spit axels - paint, Kurt Oblinger <=