> > Does anyone out there in Triumph-land have the camshaft timing
>specifications
> > for a '74 1/2 TR-6 (Engine # CF28236UE); i believe this has the 'later'
>spec
>Make Lift Timing Dur Band Bhp/L Bhp
>---- ---- ------ --- ---- ----- ---
>TR5/6(PI early).360 35 65 280 2500-5500 57 142
>TR6 (PI late) .340 18 58 256 2000-5000 50 126
>Unfortunatly, I don't think this table really answers your question,
>as I don't think any of these specs really match the USA spec'd cars.
>I think this as none of the USA cars had 158 bhp.
Cams were different, and later TR6's ('72 and later) had low-
compression heads (7.5:1, earlier were 8.5:1). Later US TR6's had a better
cam, so they didn't lose much HP, though they lost some torque I think.
The later US TR6 cam might be the earlier PI cam. US TR6 HP was ~105, torque
in the 140+ range. The Strombergs lose out to FI bigtime above 4000-4500 RPM.
--
Randell Jesup, Scala US R&D, Ex-Commodore-Amiga Engineer class of '94
Randell.Jesup@scala.com
|