I just drilled an appropriate hole and installed 10/32 â??Riv nutsâ?? and
screwed the studs inâ?¦ all done from above â?¦ easy-peasy
Jim
B382000446 LRXFE
Sent from my ShoePhone
> On Oct 1, 2023, at 3:51 PM, Clyde Mclaughlin <clydemclaughlin618@gmail.com>
> wrote:
>
> 
> Get a stud with #10 machine thread, drill the hole to appropriate size, put
> a small punch through the hole and tap it, it will put a dent in the panel in
> the trunk underneath, then use a rota broach bit and make a 1/2" hole in that
> under panel, now you can install a nut and washer on the the treaded stud,
> maybe use some blue locktite or a nylock nut. problem solved for good.
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
>
> Unsubscribe: http://autox.team.net/mailman/options/tigers/jim@island.net
>
>
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|