Re: [Tigers] Throttle Linkage

[Richard Bruner via Tigers <tigers@autox.team.net>]

--===============7661338483504572693==

------=_20230410172405_53610
Content-Transfer-Encoding: 8bit



https://www.gtsparkplugs.com/sunbeam-tiger-throttle-linkage.html


On Mon, April 10, 2023 3:58 pm, Joe Brown wrote:
> I
started having some issues with my throttle and figured out that the
> linkage attached to the gas pedal was slipping. There is a bolt
that
> pinches the throttle cable lever onto the rod coming from
the pedal. I
> tightened it down as far as it would go and it
still slips. In the photo
> below the bolt is removed.
>
> I was looking at this linkage in my parts manual and it
doesn't show the
> welded on tab that mine has. See the red arrow
in the photo. Maybe a
> later edition of the manual shows this.
I'm not sure what that tab would
> be for. Any ideas?
>
> I think my only fix will be to try and attach the lever to the
welded tab
> so that it won't slip on the rod any more. Any and
all suggestions are
> welcome.
> [image: image.png]
>
> Thanks,
> Joe Brown
>
_______________________________________________
>
>
tigers@autox.team.net
>
> Donate:
> Archive:
http://www.team.net/pipermail/tigers
>
http://autox.team.net/archive
>
> Unsubscribe:
>
http://autox.team.net/mailman/options/tigers/gammaman@mokancomm.net
>
>
>

------=_20230410172405_53610
Content-Transfer-Encoding: 8bit

https://www.gtsparkplugs.com/sunbeam-tiger-throttle-linkage.html<br /><br
/><br />On Mon, April 10, 2023 3:58 pm, Joe Brown wrote:<br />&gt; I
started having some issues with my throttle and figured out that the<br
/>&gt; linkage attached to the gas pedal was slipping. There is a bolt
that<br />&gt; pinches the throttle cable lever onto the rod coming from
the pedal. I<br />&gt; tightened it down as far as it would go and it
still slips. In the photo<br />&gt; below the bolt is removed.<br
/>&gt;<br />&gt; I was looking at this linkage in my parts manual and it
doesn't show the<br />&gt; welded on tab that mine has. See the red arrow
in the photo. Maybe a<br />&gt; later edition of the manual shows this.
I'm not sure what that tab would<br />&gt; be for. Any ideas?<br />&gt;<br
/>&gt; I think my only fix will be to try and attach the lever to the
welded tab<br />&gt; so that it won't slip on the rod any more. Any and
all suggestions are<br />&gt; welcome.<br />&gt; [image: image.png]<br
/>&gt;<br />&gt; Thanks,<br />&gt; Joe Brown<br />&gt;
_______________________________________________<br />&gt;<br />&gt;
tigers@autox.team.net<br />&gt;<br />&gt; Donate:
http://www.team.net/pipermail/tigers<br />&gt;
http://autox.team.net/archive<br />&gt;<br />&gt; Unsubscribe:<br />&gt;
http://autox.team.net/mailman/options/tigers/gammaman@mokancomm.net<br
/>&gt;<br />&gt;<br />&gt;
------=_20230410172405_53610--



--===============7661338483504572693==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net



--===============7661338483504572693==--