--===============6925042042020647494==
boundary="----=_Part_85471_1739972492.1660904951800"
------=_Part_85471_1739972492.1660904951800
Content-Transfer-Encoding: quoted-printable
Thanks Ron for the photo. =C2=A0This shows the inside portion well. =C2=A0=
What does the eyebrow look like? =C2=A0Do you have to drill out the =E2=80=
=98three rivets=E2=80=99 on the eye brow or just the center one?
>From the cat forum pictures, it looks like you to drill out all three and t=
hen have a mess to fix and repaint the the eye brow. =C2=A0Is this right?
Thanks=C2=A0
Joel On Wednesday, August 17, 2022, 02:37:57 PM EDT, Ron Fraser <rfraser=
@bluefrog.com> wrote: =20
=20
=20
Richard
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 That looks like a good article on the subject=C2=A0 - thank=
s for the link.
=C2=A0
Joel
Here is a picture of my original screw type clip.
I use Low Strength Threadlock on the screw, just for a safety factor.
=C2=A0
Ron Fraser
=C2=A0
From: Tigers <tigers-bounces@autox.team.net> On Behalf Of Richard Bruner vi=
a Tigers
Sent: Wednesday, August 17, 2022 8:25 AM
To: Joel Martin <jmartiniii@yahoo.com>
Cc: tigers@autox.team.net
Subject: Re: [Tigers] Tigers Digest, Vol 15, Issue 146
=C2=A0
https://www.catmbr.org/cat-forum/threads/headlight-bezel-ring-modification.=
4224/
On Wed, August 17, 2022 5:26 am, Joel Martin via Tigers wrote:
> Thanks
> Has anyone done a write up on making the conversion that they would share=
?
> On Tuesday, August 16, 2022, 06:31:07 PM EDT, twotigers@verizon.net
> <twotigers@verizon.net> wrote:
>
>
> I wouldn=C3=A2=E2=82=AC=E2=84=A2t trust the clip on version over 100 mph-=
don=C3=A2=E2=82=AC=E2=84=A2t ask=C3=A2=E2=82=AC=C2=A6
>
> =C3=82=C2=A0
>
> Kirk
>
> =C3=82=C2=A0
>
>
From: Tigers <tigers-bounces@autox.team.net> On Behalf Of Joel Martin via
> Tigers
> Sent: Tuesday, August 16, 2022 12:19 PM
> To: tigers@autox.team.net
> Subject: Re: [Tigers] Tigers Digest, Vol 15, Issue 146
>
> =C3=82=C2=A0
>
> All - FYI
>
> =C3=82=C2=A0
>
> I did not know there were two types of clips to hold on the headlight eye
> brow - a screw on clip and a clip on version.=C3=82=C2=A0 Rick at SS sell=
s the screw
> on version EL52D and Moss Motors sells the clip on version which works
> just fine 560-325 on the MK1A clip on version.=C3=82=C2=A0 Rick at SS doe=
s not sell
> the clip on version
>
> =C3=82=C2=A0
>
>
>
>
> Original=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=
=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=
=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=
=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=
=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=
=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=
=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=
=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0
> SS part EL52D screw on
> =C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=
=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=
=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=
=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=
=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=
=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=
=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0
> Moss Clip on 560-325 - the black 'curved' piece is what breaks.
>
> =C3=82=C2=A0
>
> I wonder why the original 56 year old clip broke?
>
> =C3=82=C2=A0
>
> Joel Martin
>
> =C3=82=C2=A0
>
> On Wednesday, May 11, 2022 at 02:01:12 PM EDT,
> <tigers-request@autox.team.net> wrote:
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> Send Tigers mailing list submissions to
>
> =C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0 tigers@autox.team.net
>
> =C3=82=C2=A0
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> =C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0 http://autox.team.net/mailman/listin=
fo/tigers
>
> or, via email, send a message with subject or body 'help' to
>
> =C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0 tigers-request@autox.team.net
>
> =C3=82=C2=A0
>
> You can reach the person managing the list at
>
> =C3=82=C2=A0=C3=82=C2=A0=C3=82=C2=A0 tigers-owner@autox.team.net
>
> =C3=82=C2=A0
>
> When replying, please edit your Subject line so it is more specific
>
> than "Re: Contents of Tigers digest..."
>
> Today's Topics:
>
> =C3=82=C2=A0 1. EL52D Screw on Head light rim from SS (Joel Martin)
> =C3=82=C2=A0 2. Re: EL52D Screw on Head light rim from SS (jimdamelio)
> =C3=82=C2=A0 3. Re: EL52D Screw on Head light rim from SS (Joe Brown)
>
> Hello all!
>
> =C3=82=C2=A0
>
> Pulled up at a buddies garage and while we talking, I noticed the
> passenger side headlight ring in the wrong position.=C3=82=C2=A0 It was r=
eady to
> fall off.=C3=82=C2=A0 So I removed it and the clip was broken and just fe=
ll out.=C3=82=C2=A0
> Dodged a bullet that this did not happen while driving.
>
> =C3=82=C2=A0
>
> Rick no longer carries the clip anymore and it is replaced with a screw o=
n
> clip, screws not included.
>
> =C3=82=C2=A0
>
> Has anyone installed these on their cars and has done a write up
> procedure, Rick has not.=C3=82=C2=A0 I understand from Rick you drill out=
the 2
> rivets, take out the old bracket and install the new clip with 2 # screws=
,
> Phillips head but not ask the length so I bought 4- #6 phillips 1/2".
>
> =C3=82=C2=A0
>
> I really do not want to start drilling on the rivets till I really know
> the proper procedure.=C3=82=C2=A0 My Tiger was accepted in the Sandhills =
Motoring
> Festival concourse event in Pinehurst on May 29th so need to tackle this
> now in addition to much detailing.
>
> =C3=82=C2=A0
>
> Any help would be greatly appreciated.
>
> =C3=82=C2=A0
>
> Joel
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> Joel,
>
> =C3=82=C2=A0
>
> Moss sells the snap on clips if you don't want to change to screw on.=C3=
=82=C2=A0
> Part #=C3=82=C2=A0560-325
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> https://mossmotors.com/headlamp-clip
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> Sent from my Galaxy
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> -------- Original message --------
>
>
From: Joel Martin via Tigers <tigers@autox.team.net>
>
> Date: 5/10/22 4:35 PM (GMT-05:00)
>
> To: Tiger List Serve <tigers@autox.team.net>
>
> Subject: [Tigers] EL52D Screw on Head light rim from SS
>
> =C3=82=C2=A0
>
> Hello all!
>
> =C3=82=C2=A0
>
> Pulled up at a buddies garage and while we talking, I noticed the
> passenger side headlight ring in the wrong position.=C3=82=C2=A0 It was r=
eady to
> fall off.=C3=82=C2=A0 So I removed it and the clip was broken and just fe=
ll out.=C3=82=C2=A0
> Dodged a bullet that this did not happen while driving.
>
> =C3=82=C2=A0
>
> Rick no longer carries the clip anymore and it is replaced with a screw o=
n
> clip, screws not included.
>
> =C3=82=C2=A0
>
> Has anyone installed these on their cars and has done a write up
> procedure, Rick has not.=C3=82=C2=A0 I understand from Rick you drill out=
the 2
> rivets, take out the old bracket and install the new clip with 2 # screws=
,
> Phillips head but not ask the length so I bought 4- #6 phillips 1/2".
>
> =C3=82=C2=A0
>
> I really do not want to start drilling on the rivets till I really know
> the proper procedure.=C3=82=C2=A0 My Tiger was accepted in the Sandhills =
Motoring
> Festival concourse event in Pinehurst on May 29th so need to tackle this
> now in addition to much detailing.
>
> =C3=82=C2=A0
>
> Any help would be greatly appreciated.
>
> =C3=82=C2=A0
>
> Joel
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> What happened to all of the Sunbeam parts that Victoria British had when
> they were bought by Moss?
>
> =C3=82=C2=A0
>
> Have Fun,
>
> Joe Brown
>
> =C3=82=C2=A0
>
> On Tue, May 10, 2022 at 3:58 PM jimdamelio via Tigers
> <tigers@autox.team.net> wrote:
>
>
> Joel,
>
> =C3=82=C2=A0
>
> Moss sells the snap on clips if you don't want to change to screw on.=C3=
=82=C2=A0
> Part #=C3=82=C2=A0560-325
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> https://mossmotors.com/headlamp-clip
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> Sent from my Galaxy
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> -------- Original message --------
>
>
From: Joel Martin via Tigers <tigers@autox.team.net>
>
> Date: 5/10/22 4:35 PM (GMT-05:00)
>
> To: Tiger List Serve <tigers@autox.team.net>
>
> Subject: [Tigers] EL52D Screw on Head light rim from SS
>
> =C3=82=C2=A0
>
> Hello all!
>
> =C3=82=C2=A0
>
> Pulled up at a buddies garage and while we talking, I noticed the
> passenger side headlight ring in the wrong position.=C3=82=C2=A0 It was r=
eady to
> fall off.=C3=82=C2=A0 So I removed it and the clip was broken and just fe=
ll out.=C3=82=C2=A0
> Dodged a bullet that this did not happen while driving.
>
> =C3=82=C2=A0
>
> Rick no longer carries the clip anymore and it is replaced with a screw o=
n
> clip, screws not included.
>
> =C3=82=C2=A0
>
> Has anyone installed these on their cars and has done a write up
> procedure, Rick has not.=C3=82=C2=A0 I understand from Rick you drill out=
the 2
> rivets, take out the old bracket and install the new clip with 2 # screws=
,
> Phillips head but not ask the length so I bought 4- #6 phillips 1/2".
>
> =C3=82=C2=A0
>
> I really do not want to start drilling on the rivets till I really know
> the proper procedure.=C3=82=C2=A0 My Tiger was accepted in the Sandhills =
Motoring
> Festival concourse event in Pinehurst on May 29th so need to tackle this
> now in addition to much detailing.
>
> =C3=82=C2=A0
>
> Any help would be greatly appreciated.
>
> =C3=82=C2=A0
>
> Joel
>
> =C3=82=C2=A0
>
> =C3=82=C2=A0
>
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com
>
>
>
>
> _______________________________________________
> Tigers mailing list
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/gammaman@mokancomm.net
>
>
>
=20
------=_Part_85471_1739972492.1660904951800
Content-Transfer-Encoding: quoted-printable
<html><head></head><body><div class=3D"ydp3af9b30cyahoo-style-wrap" style=
=3D"font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:16px=
;"><div></div>
<div>Thanks Ron for the photo. This shows the inside portion =
well. What does the eyebrow look like? Do you have to drill out=
the =E2=80=98three rivets=E2=80=99 on the eye brow or just the center one?=
</div><div><br></div><div>From the cat forum pictures, it looks like you to=
drill out all three and then have a mess to fix and repaint the the eye br=
ow. Is this right?</div><div><br></div><div><br></div><div>Thanks&nbs=
p;</div><div><br></div><div>Joel</div>
=20
<div id=3D"ydp3af9b30cyahoo_quoted_1644817895" class=3D"ydp3af9b30c=
yahoo_quoted">
<div style=3D"font-family:'Helvetica Neue', Helvetica, Arial, s=
ans-serif;font-size:13px;color:#26282a;">
=20
<div>
On Wednesday, August 17, 2022, 02:37:57 PM EDT, Ron Fra=
ser <rfraser@bluefrog.com> wrote:
</div>
<div><br></div>
<div><br></div>
<div><div id=3D"ydp3af9b30cyiv6619068678"><div><div class=
=3D"ydp3af9b30cyiv6619068678WordSection1"><p class=3D"ydp3af9b30cyiv6619068=
678MsoNormal">Richard</p><p class=3D"ydp3af9b30cyiv6619068678MsoNormal">&nb=
sp; =
That looks like a good article on the subject - thanks f=
or the link.</p><p class=3D"ydp3af9b30cyiv6619068678MsoNormal"> </p><=
p class=3D"ydp3af9b30cyiv6619068678MsoNormal">Joel</p><p class=3D"ydp3af9b3=
0cyiv6619068678MsoNormal">Here is a picture of my original screw type clip.=
</p><p class=3D"ydp3af9b30cyiv6619068678MsoNormal">I use Low Strength Threa=
dlock on the screw, just for a safety factor.</p><p class=3D"ydp3af9b30cyiv=
6619068678MsoNormal"> </p><p class=3D"ydp3af9b30cyiv6619068678MsoNorm=
al">Ron Fraser</p><p class=3D"ydp3af9b30cyiv6619068678MsoNormal"> </p=
><div id=3D"ydp3af9b30cyiv6619068678yqt60354" class=3D"ydp3af9b30cyiv661906=
8678yqt4020690629"><p class=3D"ydp3af9b30cyiv6619068678MsoNormal"><b>From:<=
/b> Tigers <tigers-bounces@autox.team.net> <b>On Behalf Of </b>Richar=
d Bruner via Tigers<br clear=3D"none"><b>Sent:</b> Wednesday, August 17, 20=
22 8:25 AM<br clear=3D"none"><b>To:</b> Joel Martin <jmartiniii@yahoo.co=
m><br clear=3D"none"><b>Cc:</b> tigers@autox.team.net<br clear=3D"none">=
<b>Subject:</b> Re: [Tigers] Tigers Digest, Vol 15, Issue 146</p><p class=
=3D"ydp3af9b30cyiv6619068678MsoNormal"> </p><p class=3D"ydp3af9b30cyi=
v6619068678MsoNormal"><a shape=3D"rect" href=3D"https://www.catmbr.org/cat-=
forum/threads/headlight-bezel-ring-modification.4224/" rel=3D"nofollow" tar=
get=3D"_blank">https://www.catmbr.org/cat-forum/threads/headlight-bezel-rin=
g-modification.4224/</a><br clear=3D"none"><br clear=3D"none"><br clear=3D"=
none">On Wed, August 17, 2022 5:26 am, Joel Martin via Tigers wrote:<br cle=
ar=3D"none">> Thanks<br clear=3D"none">> Has anyone done a write up o=
n making the conversion that they would share?<br clear=3D"none">> On Tu=
esday, August 16, 2022, 06:31:07 PM EDT, <a shape=3D"rect" href=3D"mailto:t=
wotigers@verizon.net" rel=3D"nofollow" target=3D"_blank">twotigers@verizon.=
net</a><br clear=3D"none">> <<a shape=3D"rect" href=3D"mailto:twotige=
rs@verizon.net" rel=3D"nofollow" target=3D"_blank">twotigers@verizon.net</a=
>> wrote:<br clear=3D"none">><br clear=3D"none">><br clear=3D"none=
">> I wouldn=C3=A2=E2=82=AC=E2=84=A2t trust the clip on version over 100=
mph- don=C3=A2=E2=82=AC=E2=84=A2t ask=C3=A2=E2=82=AC=C2=A6<br clear=3D"non=
e">><br clear=3D"none">> =C3=82 <br clear=3D"none">><br clear=
=3D"none">> Kirk<br clear=3D"none">><br clear=3D"none">> =C3=82&nb=
sp;<br clear=3D"none">><br clear=3D"none">><br clear=3D"none">From: T=
igers <<a shape=3D"rect" href=3D"mailto:tigers-bounces@autox.team.net"; r=
el=3D"nofollow" target=3D"_blank">tigers-bounces@autox.team.net</a>> On =
Behalf Of Joel Martin via<br clear=3D"none">> Tigers<br clear=3D"none">&=
gt; Sent: Tuesday, August 16, 2022 12:19 PM<br clear=3D"none">> To: <a s=
hape=3D"rect" href=3D"mailto:tigers@autox.team.net"; rel=3D"nofollow" target=
=3D"_blank">tigers@autox.team.net</a><br clear=3D"none">> Subject: Re: [=
Tigers] Tigers Digest, Vol 15, Issue 146<br clear=3D"none">><br clear=3D=
"none">> =C3=82 <br clear=3D"none">><br clear=3D"none">> All =
- FYI<br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=
=3D"none">><br clear=3D"none">> I did not know there were two types o=
f clips to hold on the headlight eye<br clear=3D"none">> brow - a screw =
on clip and a clip on version.=C3=82 Rick at SS sells the screw<br cl=
ear=3D"none">> on version EL52D and Moss Motors sells the clip on versio=
n which works<br clear=3D"none">> just fine 560-325 on the MK1A clip on =
version.=C3=82 Rick at SS does not sell<br clear=3D"none">> the cl=
ip on version<br clear=3D"none">><br clear=3D"none">> =C3=82 <br=
clear=3D"none">><br clear=3D"none">><br clear=3D"none">><br clear=
=3D"none">><br clear=3D"none">> Original=C3=82 =C3=82 =C3=
=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82=
=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82&nb=
sp;=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =
=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=
=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82=
=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82&nb=
sp;=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =
=C3=82 <br clear=3D"none">> SS part EL52D screw on<br clear=3D"none=
">> =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82&n=
bsp;=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =
;=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =
=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=
=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82=
=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 =C3=82&nb=
sp;=C3=82 =C3=82 =C3=82 =C3=82 =C3=82 <br clear=3D=
"none">> Moss Clip on 560-325 - the black 'curved' piece is what breaks.=
<br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"non=
e">><br clear=3D"none">> I wonder why the original 56 year old clip b=
roke?<br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=
=3D"none">><br clear=3D"none">> Joel Martin<br clear=3D"none">><br=
clear=3D"none">> =C3=82 <br clear=3D"none">><br clear=3D"none">=
> On Wednesday, May 11, 2022 at 02:01:12 PM EDT,<br clear=3D"none">> =
<<a shape=3D"rect" href=3D"mailto:tigers-request@autox.team.net"; rel=3D"=
nofollow" target=3D"_blank">tigers-request@autox.team.net</a>> wrote:<br=
clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"none">=
><br clear=3D"none">> =C3=82 <br clear=3D"none">><br clear=3D=
"none">> Send Tigers mailing list submissions to<br clear=3D"none">><=
br clear=3D"none">> =C3=82 =C3=82 =C3=82 <a shape=3D"rec=
t" href=3D"mailto:tigers@autox.team.net"; rel=3D"nofollow" target=3D"_blank"=
>tigers@autox.team.net</a><br clear=3D"none">><br clear=3D"none">> =
=C3=82 <br clear=3D"none">><br clear=3D"none">> To subscribe or =
unsubscribe via the World Wide Web, visit<br clear=3D"none">><br clear=
=3D"none">> =C3=82 =C3=82 =C3=82 <a shape=3D"rect" href=
=3D"http://autox.team.net/mailman/listinfo/tigers"; rel=3D"nofollow" target=
=3D"_blank">http://autox.team.net/mailman/listinfo/tigers</a><br clear=3D"n=
one">><br clear=3D"none">> or, via email, send a message with subject=
or body 'help' to<br clear=3D"none">><br clear=3D"none">> =C3=82&nbs=
p;=C3=82 =C3=82 <a shape=3D"rect" href=3D"mailto:tigers-request@=
autox.team.net" rel=3D"nofollow" target=3D"_blank">tigers-request@autox.tea=
m.net</a><br clear=3D"none">><br clear=3D"none">> =C3=82 <br cle=
ar=3D"none">><br clear=3D"none">> You can reach the person managing t=
he list at<br clear=3D"none">><br clear=3D"none">> =C3=82 =C3=82=
=C3=82 <a shape=3D"rect" href=3D"mailto:tigers-owner@autox.team=
.net" rel=3D"nofollow" target=3D"_blank">tigers-owner@autox.team.net</a><br=
clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"none">=
><br clear=3D"none">> When replying, please edit your Subject line so=
it is more specific<br clear=3D"none">><br clear=3D"none">> than "Re=
: Contents of Tigers digest..."<br clear=3D"none">><br clear=3D"none">&g=
t; Today's Topics:<br clear=3D"none">><br clear=3D"none">> =C3=82&nbs=
p; 1. EL52D Screw on Head light rim from SS (Joel Martin)<br clear=3D"none"=
>> =C3=82 2. Re: EL52D Screw on Head light rim from SS (jimdamelio=
)<br clear=3D"none">> =C3=82 3. Re: EL52D Screw on Head light rim =
from SS (Joe Brown)<br clear=3D"none">><br clear=3D"none">> Hello all=
!<br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"no=
ne">><br clear=3D"none">> Pulled up at a buddies garage and while we =
talking, I noticed the<br clear=3D"none">> passenger side headlight ring=
in the wrong position.=C3=82 It was ready to<br clear=3D"none">> =
fall off.=C3=82 So I removed it and the clip was broken and just fell=
out.=C3=82 <br clear=3D"none">> Dodged a bullet that this did not =
happen while driving.<br clear=3D"none">><br clear=3D"none">> =C3=82&=
nbsp;<br clear=3D"none">><br clear=3D"none">> Rick no longer carries =
the clip anymore and it is replaced with a screw on<br clear=3D"none">> =
clip, screws not included.<br clear=3D"none">><br clear=3D"none">> =
=C3=82 <br clear=3D"none">><br clear=3D"none">> Has anyone insta=
lled these on their cars and has done a write up<br clear=3D"none">> pro=
cedure, Rick has not.=C3=82 I understand from Rick you drill out the =
2<br clear=3D"none">> rivets, take out the old bracket and install the n=
ew clip with 2 # screws,<br clear=3D"none">> Phillips head but not ask t=
he length so I bought 4- #6 phillips 1/2".<br clear=3D"none">><br clear=
=3D"none">> =C3=82 <br clear=3D"none">><br clear=3D"none">> I=
really do not want to start drilling on the rivets till I really know<br c=
lear=3D"none">> the proper procedure.=C3=82 My Tiger was accepted =
in the Sandhills Motoring<br clear=3D"none">> Festival concourse event i=
n Pinehurst on May 29th so need to tackle this<br clear=3D"none">> now i=
n addition to much detailing.<br clear=3D"none">><br clear=3D"none">>=
=C3=82 <br clear=3D"none">><br clear=3D"none">> Any help would =
be greatly appreciated.<br clear=3D"none">><br clear=3D"none">> =C3=
=82 <br clear=3D"none">><br clear=3D"none">> Joel<br clear=3D"no=
ne">><br clear=3D"none">> =C3=82 <br clear=3D"none">><br clea=
r=3D"none">> =C3=82 <br clear=3D"none">><br clear=3D"none">> =
Joel,<br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=
=3D"none">><br clear=3D"none">> Moss sells the snap on clips if you d=
on't want to change to screw on.=C3=82 <br clear=3D"none">> Part #=
=C3=82 560-325<br clear=3D"none">><br clear=3D"none">> =C3=82&nb=
sp;<br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"=
none">><br clear=3D"none">> <a shape=3D"rect" href=3D"https://mossmot=
ors.com/headlamp-clip" rel=3D"nofollow" target=3D"_blank">https://mossmotor=
s.com/headlamp-clip</a><br clear=3D"none">><br clear=3D"none">> =C3=
=82 <br clear=3D"none">><br clear=3D"none">> =C3=82 <br cle=
ar=3D"none">><br clear=3D"none">> Sent from my Galaxy<br clear=3D"non=
e">><br clear=3D"none">> =C3=82 <br clear=3D"none">><br clear=
=3D"none">> =C3=82 <br clear=3D"none">><br clear=3D"none">> -=
------- Original message --------<br clear=3D"none">><br clear=3D"none">=
><br clear=3D"none">From: Joel Martin via Tigers <<a shape=3D"rect" h=
ref=3D"mailto:tigers@autox.team.net"; rel=3D"nofollow" target=3D"_blank">tig=
ers@autox.team.net</a>><br clear=3D"none">><br clear=3D"none">> Da=
te: 5/10/22 4:35 PM (GMT-05:00)<br clear=3D"none">><br clear=3D"none">&g=
t; To: Tiger List Serve <<a shape=3D"rect" href=3D"mailto:tigers@autox.t=
eam.net" rel=3D"nofollow" target=3D"_blank">tigers@autox.team.net</a>><b=
r clear=3D"none">><br clear=3D"none">> Subject: [Tigers] EL52D Screw =
on Head light rim from SS<br clear=3D"none">><br clear=3D"none">> =C3=
=82 <br clear=3D"none">><br clear=3D"none">> Hello all!<br clear=
=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"none">><b=
r clear=3D"none">> Pulled up at a buddies garage and while we talking, I=
noticed the<br clear=3D"none">> passenger side headlight ring in the wr=
ong position.=C3=82 It was ready to<br clear=3D"none">> fall off.=
=C3=82 So I removed it and the clip was broken and just fell out.=C3=
=82 <br clear=3D"none">> Dodged a bullet that this did not happen w=
hile driving.<br clear=3D"none">><br clear=3D"none">> =C3=82 <br=
clear=3D"none">><br clear=3D"none">> Rick no longer carries the clip=
anymore and it is replaced with a screw on<br clear=3D"none">> clip, sc=
rews not included.<br clear=3D"none">><br clear=3D"none">> =C3=82&nbs=
p;<br clear=3D"none">><br clear=3D"none">> Has anyone installed these=
on their cars and has done a write up<br clear=3D"none">> procedure, Ri=
ck has not.=C3=82 I understand from Rick you drill out the 2<br clear=
=3D"none">> rivets, take out the old bracket and install the new clip wi=
th 2 # screws,<br clear=3D"none">> Phillips head but not ask the length =
so I bought 4- #6 phillips 1/2".<br clear=3D"none">><br clear=3D"none">&=
gt; =C3=82 <br clear=3D"none">><br clear=3D"none">> I really do =
not want to start drilling on the rivets till I really know<br clear=3D"non=
e">> the proper procedure.=C3=82 My Tiger was accepted in the Sand=
hills Motoring<br clear=3D"none">> Festival concourse event in Pinehurst=
on May 29th so need to tackle this<br clear=3D"none">> now in addition =
to much detailing.<br clear=3D"none">><br clear=3D"none">> =C3=82&nbs=
p;<br clear=3D"none">><br clear=3D"none">> Any help would be greatly =
appreciated.<br clear=3D"none">><br clear=3D"none">> =C3=82 <br =
clear=3D"none">><br clear=3D"none">> Joel<br clear=3D"none">><br c=
lear=3D"none">> =C3=82 <br clear=3D"none">><br clear=3D"none">&g=
t; =C3=82 <br clear=3D"none">><br clear=3D"none">> What happened=
to all of the Sunbeam parts that Victoria British had when<br clear=3D"non=
e">> they were bought by Moss?<br clear=3D"none">><br clear=3D"none">=
> =C3=82 <br clear=3D"none">><br clear=3D"none">> Have Fun,<b=
r clear=3D"none">><br clear=3D"none">> Joe Brown<br clear=3D"none">&g=
t;<br clear=3D"none">> =C3=82 <br clear=3D"none">><br clear=3D"n=
one">> On Tue, May 10, 2022 at 3:58 PM jimdamelio via Tigers<br clear=3D=
"none">> <<a shape=3D"rect" href=3D"mailto:tigers@autox.team.net"; rel=
=3D"nofollow" target=3D"_blank">tigers@autox.team.net</a>> wrote:<br cle=
ar=3D"none">><br clear=3D"none">><br clear=3D"none">> Joel,<br cle=
ar=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"none">>=
<br clear=3D"none">> Moss sells the snap on clips if you don't want to c=
hange to screw on.=C3=82 <br clear=3D"none">> Part #=C3=82 560=
-325<br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D=
"none">><br clear=3D"none">> =C3=82 <br clear=3D"none">><br c=
lear=3D"none">> <a shape=3D"rect" href=3D"https://mossmotors.com/headlam=
p-clip" rel=3D"nofollow" target=3D"_blank">https://mossmotors.com/headlamp-=
clip</a><br clear=3D"none">><br clear=3D"none">> =C3=82 <br clea=
r=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"none">><=
br clear=3D"none">> Sent from my Galaxy<br clear=3D"none">><br clear=
=3D"none">> =C3=82 <br clear=3D"none">><br clear=3D"none">> =
=C3=82 <br clear=3D"none">><br clear=3D"none">> -------- Origina=
l message --------<br clear=3D"none">><br clear=3D"none">><br clear=
=3D"none">From: Joel Martin via Tigers <<a shape=3D"rect" href=3D"mailto=
:tigers@autox.team.net" rel=3D"nofollow" target=3D"_blank">tigers@autox.tea=
m.net</a>><br clear=3D"none">><br clear=3D"none">> Date: 5/10/22 4=
:35 PM (GMT-05:00)<br clear=3D"none">><br clear=3D"none">> To: Tiger =
List Serve <<a shape=3D"rect" href=3D"mailto:tigers@autox.team.net"; rel=
=3D"nofollow" target=3D"_blank">tigers@autox.team.net</a>><br clear=3D"n=
one">><br clear=3D"none">> Subject: [Tigers] EL52D Screw on Head ligh=
t rim from SS<br clear=3D"none">><br clear=3D"none">> =C3=82 <br=
clear=3D"none">><br clear=3D"none">> Hello all!<br clear=3D"none">&g=
t;<br clear=3D"none">> =C3=82 <br clear=3D"none">><br clear=3D"n=
one">> Pulled up at a buddies garage and while we talking, I noticed the=
<br clear=3D"none">> passenger side headlight ring in the wrong position=
.=C3=82 It was ready to<br clear=3D"none">> fall off.=C3=82 =
So I removed it and the clip was broken and just fell out.=C3=82 <br c=
lear=3D"none">> Dodged a bullet that this did not happen while driving.<=
br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"none=
">><br clear=3D"none">> Rick no longer carries the clip anymore and i=
t is replaced with a screw on<br clear=3D"none">> clip, screws not inclu=
ded.<br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D=
"none">><br clear=3D"none">> Has anyone installed these on their cars=
and has done a write up<br clear=3D"none">> procedure, Rick has not.=C3=
=82 I understand from Rick you drill out the 2<br clear=3D"none">>=
rivets, take out the old bracket and install the new clip with 2 # screws,=
<br clear=3D"none">> Phillips head but not ask the length so I bought 4-=
#6 phillips 1/2".<br clear=3D"none">><br clear=3D"none">> =C3=82&nbs=
p;<br clear=3D"none">><br clear=3D"none">> I really do not want to st=
art drilling on the rivets till I really know<br clear=3D"none">> the pr=
oper procedure.=C3=82 My Tiger was accepted in the Sandhills Motoring=
<br clear=3D"none">> Festival concourse event in Pinehurst on May 29th s=
o need to tackle this<br clear=3D"none">> now in addition to much detail=
ing.<br clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D=
"none">><br clear=3D"none">> Any help would be greatly appreciated.<b=
r clear=3D"none">><br clear=3D"none">> =C3=82 <br clear=3D"none"=
>><br clear=3D"none">> Joel<br clear=3D"none">><br clear=3D"none">=
> =C3=82 <br clear=3D"none">><br clear=3D"none">> =C3=82 =
;<br clear=3D"none">><br clear=3D"none">> ___________________________=
____________________<br clear=3D"none">><br clear=3D"none">> <a shape=
=3D"rect" href=3D"mailto:tigers@autox.team.net"; rel=3D"nofollow" target=3D"=
_blank">tigers@autox.team.net</a><br clear=3D"none">><br clear=3D"none">=
> Donate: <a shape=3D"rect" href=3D"http://www.team.net/donate.html"; rel=
=3D"nofollow" target=3D"_blank">http://www.team.net/donate.html</a><br clea=
r=3D"none">> Archive: <a shape=3D"rect" href=3D"http://www.team.net/pipe=
rmail/tigers" rel=3D"nofollow" target=3D"_blank">http://www.team.net/piperm=
ail/tigers</a><br clear=3D"none">> <a shape=3D"rect" href=3D"http://auto=
x.team.net/archive" rel=3D"nofollow" target=3D"_blank">http://autox.team.ne=
t/archive</a><br clear=3D"none">><br clear=3D"none">> Unsubscribe:<br=
clear=3D"none">> <a shape=3D"rect" href=3D"http://autox.team.net/mailma=
n/options/tigers/jbbrown1980@gmail.com" rel=3D"nofollow" target=3D"_blank">=
http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com</a><br c=
lear=3D"none">><br clear=3D"none">><br clear=3D"none">><br clear=
=3D"none">><br clear=3D"none">> _____________________________________=
__________<br clear=3D"none">> Tigers mailing list<br clear=3D"none">>=
; <a shape=3D"rect" href=3D"mailto:Tigers@autox.team.net"; rel=3D"nofollow" =
target=3D"_blank">Tigers@autox.team.net</a><br clear=3D"none">> <a shape=
=3D"rect" href=3D"http://autox.team.net/mailman/listinfo/tigers"; rel=3D"nof=
ollow" target=3D"_blank">http://autox.team.net/mailman/listinfo/tigers</a><=
br clear=3D"none">><br clear=3D"none">> Donate: <a shape=3D"rect" hre=
f=3D"http://www.team.net/donate.html"; rel=3D"nofollow" target=3D"_blank">ht=
tp://www.team.net/donate.html</a><br clear=3D"none">> Archive: <a shape=
=3D"rect" href=3D"http://www.team.net/pipermail/tigers"; rel=3D"nofollow" ta=
rget=3D"_blank">http://www.team.net/pipermail/tigers</a><br clear=3D"none">=
> <a shape=3D"rect" href=3D"http://autox.team.net/archive"; rel=3D"nofoll=
ow" target=3D"_blank">http://autox.team.net/archive</a><br clear=3D"none">&=
gt; _______________________________________________<br clear=3D"none">><=
br clear=3D"none">> <a shape=3D"rect" href=3D"mailto:tigers@autox.team.n=
et" rel=3D"nofollow" target=3D"_blank">tigers@autox.team.net</a><br clear=
=3D"none">><br clear=3D"none">> Donate: <a shape=3D"rect" href=3D"htt=
p://www.team.net/donate.html" rel=3D"nofollow" target=3D"_blank">http://www=
.team.net/donate.html</a><br clear=3D"none">> Archive: <a shape=3D"rect"=
href=3D"http://www.team.net/pipermail/tigers"; rel=3D"nofollow" target=3D"_=
blank">http://www.team.net/pipermail/tigers</a><br clear=3D"none">> <a s=
hape=3D"rect" href=3D"http://autox.team.net/archive"; rel=3D"nofollow" targe=
t=3D"_blank">http://autox.team.net/archive</a><br clear=3D"none">><br cl=
ear=3D"none">> Unsubscribe:<br clear=3D"none">> <a shape=3D"rect" hre=
f=3D"http://autox.team.net/mailman/options/tigers/gammaman@mokancomm.net"; r=
el=3D"nofollow" target=3D"_blank">http://autox.team.net/mailman/options/tig=
ers/gammaman@mokancomm.net</a><br clear=3D"none">><br clear=3D"none">>=
;<br clear=3D"none">></p></div></div></div></div></div>
</div>
</div></div></body></html>
------=_Part_85471_1739972492.1660904951800--
--===============6925042042020647494==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
--===============6925042042020647494==--
|