I thought the dual pattern bell housings referred to the trans end where
there are both wide and narrow bolt patterns for the early/late toploader...
A friend of mine has one...and it will only fit a 6 bolt block
Jim
B382000446
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Tod Brown
Sent: Saturday, December 07, 2013 11:06 AM
To: tigers@autox.team.net; Andy Walker
Subject: Re: [Tigers] Engine Swap
Andy:
Not that it probably matters in your situation but there are bell-housings
around that will bolt up to both the 5-bolt and 6-bolt blocks (they have two
sets of mounting holes). They show up occasionally on eBay. Many years ago,
my original bell housing fractured where the clutch arm enters, so I
replaced my bell housing with one with the dual pattern, anticipating that I
might, somewhere down the road, want to use a later block. That never
happened, but it's still in there.
Tod
B382002384LRXFE
TAC 864
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/jim@island.net
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6895 - Release Date: 12/05/13
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|