Joel
Nozzle screws - 9731064 - #4 x 3/8" - 4; this is a binder head
screw, most likely slotted
Bezel screws - 9731085 -#4 x 1/2" - 4; this is an oval head screw,
probably chrome since this is a finish screw, Phillips drive, use polished
SS screw for this if you don't find chrome ones
Yes there is a bracket for the dimmer switch, sit under the carpet, bracket
is fairly simple you might be able to make one
I think there was a very thin vinyl type sheet on the tunnel; center cubby
box cover most of it
There is a vinyl and cardboard piece for the fender wells
Vent/ temp have black plastic knobs
Windshield washer bracket has 2 parts; the round cage for the bottle and an
"L" bracket with 2 screws for the cage and 1 bolt to the body
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Joel Martin
Sent: Tuesday, October 08, 2013 3:29 PM
To: Tiger List Serve
Subject: [Tigers] Questions and parts needed
All
Working on the under dash and interior pieces and have a couple of questions
and a couple of parts needed only available used.
What type of
screw head and size holds the 2 dash defroster vents? Are there any other
parts that go on or around the vents?
DEFROSTER NOZZLES 4 #8 3/8
SMS PAN,SL
??? - Is this correct?
PAN PAN HEAD
SL SLOTTED
ORIG ORIGINAL FASTENER
Is there a bracket that holds the foot dimmer
switch to the firewall? If so would need used? - Anyone have one they
would be willing to part with?
Does carpet cover the transmission tunnel back of
the shifter to the rear shelf? The armrest sits on top but not the entire
length. My carpet kit did not have a piece for this? Also what about the
rear fender wells - is this carpet or something else?
I need 1 or 2 of the
90 degree elbows that attach the defroster hoses to the defusers. Please!
What do the knobs look like that go onto the vent\temp controllers in the
dash? Mine are missing and would need to buy a pair? And no, not what you
are thinking!
Is there a second bracket that hold the windshield washer bottle to the body
- front passenger side engine compartment other than just the one bracket
that holds the bottle? Either I am missing a few holes or there is a second
bracket.
As always, thank you for the information and any
pictures you could provide is greatly appreciated!
Regards
Joel Martin
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|