Mentioned before... wiring. check it. Carefully, and check the ground
resistance from the bulb sockets to frame ground. Ron's right, first step,
jumper the wires at the switch and check the lights. Rick at SS carries the
switch. Paul Sheahan taught me well although I've never had to use it; I
bought two switches just in case.
Tom
'67 Mark 2
On Wed, Sep 25, 2013 at 4:06 PM, michael@michaelshortt.com <
michaelsavga@gmail.com> wrote:
> There is a brakelight switch there, it is hydraulic and built into the
> brake lines.
> Its a big deal to replace it. The common solution is to install a
> mechanical switch on the pedal assembly.
> Here's some info.
> http://www.sunbeamalpine.org/forum/archive/index.php?t-13621.html
>
> Michael Shortt
> I have no brake lights. The rear tail lights and turn signals work, so
> bulbs
> or ground are not the issue. I can't find anything electrical associated
> with the brake pedal. What actually activates the brake lights? Thanks!
>
>
>
> BTW, Tigger was accepted for the Hilton Head Concours, first weekend of
> November.
>
>
>
> Jim Pickard
>
> B9473298
>
> Beaufort, SC
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/michael@michaelshortt.com
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/tkparker1941@gmail.com
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|