tigers
[Top] [All Lists]

Re: [Tigers] Where to find parts, shifter...

To: Thomas Witt <atwittsend@verizon.net>
Subject: Re: [Tigers] Where to find parts, shifter...
From: Tom Parker <tkparker1941@gmail.com>
Date: Tue, 18 Jun 2013 08:22:11 -0400
Cc: LIST TIGER <tigers@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
References: <9FF91BF723C94995A88AB30203F891F5@optiplex3301> <D042A54895E54213A479150BCF74C552@ronpc1> <CAAP8cn5q2ineJvYaS_Tk3xR3ypQb+srgMOHYXd2PD1RfhsyOew@mail.gmail.com> <7495733F0DF7644CBABA4EA216EF4E151A20338C@OLAWPA-EXMB06.ad.garmin.com> <0D02D25185304333AF7B0DBAE18857DA@optiplex3301>
The water pump Rick sells for the 289 engines is listed as a "cast iron
type" because it's aluminum. It came with a spacer ring to accommodate the
oversize pulley hole. You all might want to check with Rick and see if the
260 pump also comes with a spacer ring.

 I used Summit's 14" flex fan, thanks to some guidance from Paul Sheahan
and the guys at the January T.A.C. event in Florida. I had to replace the
upper radiator hose because I had cut the old one too close to accommodate
the fan blades. Haven't tested it in traffic yet, but with the high
efficiency radiator core and the horn hole fix I have high hopes.

Tom
'67 Mark 2


On Mon, Jun 17, 2013 at 12:26 PM, Thomas Witt <atwittsend@verizon.net>wrote:

> Theo, I agree with what you have said.  Other than to keep a Tiger
> perfectly original I never understood why people continued to use the 1"
> hub.  It seems like Rootes/Ford just reversed the hub as a quick way of
> moving the fan and pulley away from the radiator.  But given the large
> desire to migrate to alternative fans (with 5/8" holes) the 1" hub is no
> longer a solution, but a hindrance.    As you have stated there are other,
> easily accomplished alternatives to do that.  My Tiger has a 5 bolt 289
> with a" who knows what front cover" and I very much suspect a "generic, one
> size fits all" 5/8" water pump. While probably not optimal I do have
> clearance using the stock radiator and the yellow Volvo fan. Perhaps with
> thicker radiators it is less of an option.
>
> Also, the other day I mentioned the need for the 1" hole if using the
> stock Tiger hub.  As Ron pointed out not every fan is a candidate for that
> modification.  Foremost in my mind at the time was the posts, and I believe
> article on Tigers United, that Steve Laifman did. He retained the stock 1"
> hub and modified the Ford Maverick fan to fit.
>
> Tom ______________________________**_________________
>
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/**options/tigers/tkparker1941@*
> *gmail.com<http://autox.team.net/mailman/options/tigers/tkparker1941@gmail.com>
_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>