Re: [Tigers] Balance pipe nipple thread

[Allan Ballard <aballard@ix.netcom.com>]

I can add that the Series IV Alpines used a different fitting than used 
on the Series V Alpines, although the
balance pipe appears identical.


Allan Ballard
Mk1a Tiger




Perhaps

On 5/22/12 3:12 PM, tim wrote:
> Listers,
>
>
>
> The parts book calls for a 1/2" UNF tube with a compression sleeve where the
> fuel line meets the balance pipe. I went through this with my Alpine and as
> I recall, the 1/2" UNF tube nut worked fine.
>
>
>
> The balance pipe I have for the Tiger seems to have a different thread. My
> local supplier was stumped and said it almost looks like a Whitworth thread.
>
>
>
> Does anybody have insight into this? I bought the pipe on EBay as the
> original was trashed so it possibly came from a different model? I guess I
> could cut the nipple off and weld on a new one or find a different pipe
> altogether but I am still puzzled by this.
>
>
>
> Thanks,
>
> Tim
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/tigers/aballard@ix.netcom.com
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: 
http://autox.team.net/mailman/options/tigers/tigers-archive@autox.team.net