Sweet. These caught my eye:
http://www.homemadetools.net/slide-hammer-vise-grips
For when vise grips by themselves can't cause enough mayhem...
I made a clamping fixture (that used vise grips) to reshape the protective
piece of sheetmetal that guards the fuel line from the crossover pipe where it
runs under the trunk. Some PO had peeled part of it back to get at that line,
and using the tool I was able to get it about 80% back to reasonable shape.
Theo
> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-
> bounces@autox.team.net] On Behalf Of CoolVT@aol.com
> Sent: March 14, 2012 8:45 AM
> To: tigers@autox.team.net
> Subject: [Tigers] Tools - Non Tiger
>
> A look at what others have come up with when they didn't have the right
> tool at hand.
>
> _http://www.homemadetools.net/automotive-8_
> (http://www.homemadetools.net/automotive-8)
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/theo.smit@dynastream.com
>
>
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.
Thank you for your cooperation.
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/tigers-archive@autox.team.net
|