Michael
5/16 bolts was used for all Std 260 and 289 connecting rods
3/8 bolts were used for Hipo engine connecting rods
I would not think any Tiger 260 engines received Hipo rods with 3/8 bolts
but it is not impossible either.
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of michael king
Sent: Thursday, February 23, 2012 12:58 AM
To: Tiger Talk List Tiger
Subject: [Tigers] 260 big end bolts
Quick question to the list..
There is a book "how to power tune the ford v8" in the book it mentions that
the 260's used 2 sizes of big end bolts. They say the early 260's used 5/16
bolts and the later 260 used 3/8.... do we know if any of the tigers used
the 5/16? I would assume by later tiger production they are 3/8... but
anyone know/experience a tiger with the 5/16?
--
Regards
Michael King
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|