Hi Jim, I know finding lengths in other than 1/2 inch increments can be a
challenge. I have ocassionally found sizes I need on ebay of all places. Some
times the industrial supply houses carry the desired lengths. I would also
check with your local Caterpiller equipment service department.B Higher
quality bolts plus they haveB CAT molded into the top!
Cheers, Gene
----- Original Message -----
From: Rollright@aol.com
To: tigers@Autox.Team.Net
Sent: Friday, October 28, 2011 7:34:22 AM
Subject: [Tigers] bolts and hardware
Hello,
B
After going to my local Ace hardware store and finding they didn't have B
about half of what I need for my bumper project, I'm asking:
B
Can I get suggestions for online hardware/fastener suppliers, please? B I'm
finding 7/16 UNF and 1/2 UNF in the lengths I need, to be a bit of B a
challenge. B A source that is EASY to use would suite me best. I've B been
challenged by what I came up with on a Google search.
B
Thanks in advance, B
Jim B Armstrong
Mk 1A B
382002083
LRXFE
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/genepadgett@comcast.net
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|