Mine was like that, but on the driver's side. I think mine was pretty
original.
Mark
In a message dated 10/11/2011 3:36:15 P.M. Eastern Daylight Time,
Theo.Smit@dynastream.com writes:
On mine, the strap ends were attached to the welded-in nut on the Alpine
transmission crossmember bracket; and on the lower transmission to
bellhousing
bolt. I think both were on the passenger side though.
Theo
>
> Hello,
>
>
>
> Just wondering what the correct fastening points are for the ground
> strap
> that connects the frame to the engine under the driver's floor pan?
>
>
>
> Thank you,
>
This e-mail and any attachments may contain confidential material for the
sole
use of the intended recipient. If you are not the intended recipient,
please
be aware that any disclosure, copying, distribution or use of this e-mail
or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.
Thank you for your cooperation.
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/coolvt@aol.com
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|