i have this one from summit:
http://www.summitracing.com/parts/OTC-4531/
it was $69 a couple of months ago. it can be used to install too and has
high quality bearings in it. don't bother with cheap ones - they don't
last and don't work as well.
On Fri, May 6, 2011 at 9:04 PM, Sandy Ganz <sganz@pacbell.net> wrote:
> That is what you need, you bolt 3 bolts into the balancer, then with the
> center
> scew you tighten it up and it pushes out the balancer. It should look like
> a
> think with 3 or 4 slots and a long center bolt.
>
>
>
>
>http://www.amazon.com/Silver-Seal-Harmonic-Balancer-Puller/dp/B002YOUTK6/ref=sr_1_4?ie=UTF8&qid=1304730250&sr=8-4
>
>
> That should be what it looks like.
>
> Sandy
>
>
>
>
> ________________________________
> From: Jeff Holt <jeff.holt7@gmail.com>
> To: Tiger List <tigers@autox.team.net>
> Sent: Fri, May 6, 2011 4:40:38 PM
> Subject: [Tigers] Puller
>
> Now I need to pull the pulley vibration damper out to get the front cover
> off.
> I need to get a "puller," so I went to O'Reilly and they sold me a Harmonic
> Balancer Puller. They insisted. I'm not sure. The center pivot thing looks
> like it's pushing from the center as opposed to pushing from the sides.
>
> Any thoughts? Maybe online parts stores are where it's at these days.
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/sganz@pacbell.net
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/owain.lloyd@gmail.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|