Jim
This should give you a bit of a visual check as to which type of
bulb holder you have.
The flange of the non removable bulb holder is 1" in diameter and looks just
bigger than where the bulb holder.
The flange of the removable bulb holder is 1 3/8" in diameter; flange looks
much bigger than the bulb holder.
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of James Lindner
Sent: Wednesday, April 20, 2011 8:47 AM
To: tigers@autox.team.net
Subject: [Tigers] Rear Bulb Replacement
Hi All,
I am afraid this one is going to show exactly how new I am to Tiger
ownership...
Yesterday I noticed my passenger side brake light was out. Driver's side is
working, so I figured it was a bulb. I have extras on hand...simple enough
to change...not so fast.
Workshop manual says get tp bulb holder from back through trunk. I reached
in and removed the female connector from the back of the bulb holder but I
can not seem to get the bulb holder out to get at the bulb. It does not seem
to budge either by unscrewing or pulling. Since I have limited knowledge I
was reluctant to apply too much pressure.
I know this is pretty basic stuff...but any help is appreciated.
Thanks, Jim
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3583 - Release Date: 04/20/11
06:34:00
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|