I used a 3/4 Datsun master and upgraded my rear to RX7 disc and it stops like
a champ with good peddle feel. Im sure there are others that have many other
set ups.
Cheers
Frank
--- On Fri, 4/15/11, Tom Parker <tkparker1941@gmail.com> wrote:
From: Tom Parker <tkparker1941@gmail.com>
Subject: [Tigers] Manual Brake Conversion
To: "LIST TIGER" <tigers@autox.team.net>
Date: Friday, April 15, 2011, 6:30 AM
Good Morning all,
I'm in the middle of a debate, more like "going to school," over how to
convert to manual brakes.
The issue centers around a near catastrophic failure of the brake system
which, fortunately, happened in my garage, as opposed to on the road: the
rear brake line sprung a leak at the driver's side wheel cylinder. What I'd
like to end up with is as close to a tandem brake system as possible. Not
too hard to do, except the Girling brake booster is in the way.
So, first question: What size master cylinder bore will stop the car without
breaking the driver;'s leg in the process? I go back a long way; when I was
young most cars didn't have power brakes, and they stopped with reasonable
effort. Today that doesn't seem to be the case.
Any thoughts? suggestions? Steve? Tom? Larry? Anyone?
Tom
' 67 Mark 2, now moving under its own power.
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/amberlychamberlain@sbcglobal.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|