it also depends on what sender you are using, and where it is mounted. From
what i understand the autometer senders that people often use mounted on the
manifold do not read well with the original gauges. If you still have the
temp sender in the original T fitting the issue should not be as bad..
though gauges over time...
I just checked mine 2 weeks back with an infrared gun.. i have an original
NOS temp gauge i installed recently.. i have an autometer sender mounted at
the front of the manifold. The gun read 10deg C warmer at the sender than i
was getting at the gauge.
On 30 March 2011 10:34, Stu Brennan <stubrennan@comcast.net> wrote:
> For info on gage troubleshooting, check out my article at:
>
> http://www.tigersunited.com/techtips/BrennanGauge/rt-BrennanGauge1.asp
>
>
> There's a explanation of how things work, and how to troubleshoot. When
> I had the symptoms you describe, the gage reading low, the problem was
> the sender going bad. It's easy to sort things out if you have an
> ohmmeter.
>
> Stu Brennan
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/michael.s.king@gmail.com
>
>
--
Regards
Michael King
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|