Mike,
Thanks. I don't think I need to worry a whole lot about how much modification I
might have to do. I am going to have to replace the floor pans, sills and most
of the trans tunnel anyway. Just have to get it to the alkali bath to strip it
of paint and rust. I'm expecting to get a cheese grater back from the dipping
process.
Sent on the Sprint. Now Network from my BlackBerry.
-----Original Message-----
From: mike schreiner <mikeflbmer@yahoo.com>
Date: Wed, 23 Feb 2011 18:19:17
To: Al Fudge<allfudge1635@gmail.com>
Subject: Re: [Tigers] Ford / Mazda 5speed transmission
I will take a picture on mine anssend it to you...also one of the one I put in
my car...I cut the center of my tranny tunnel out (it's an Alger) but you dont
have to do that....You can use a adapter/spacer to your orig bell housing and
redrill it to tilt the tranny at an angle and get it to come out orig tiger
hole...I havent put mine on the road yet, but did help drive one to the last
suni with same tranny in it (Tony Lang's car) it was great on a trip...will
take a picture in a day or so...(if I get home before dark) otherwise this
weekend as I need daylight for a decent picture...Mike
--- On Wed, 2/23/11, Al Fudge <allfudge1635@gmail.com> wrote:
From: Al Fudge <allfudge1635@gmail.com>
Subject: Re: [Tigers] Ford / Mazda 5speed transmission
To: "mike schreiner" <mikeflbmer@yahoo.com>
Cc: tigers@autox.team.net
Date: Wednesday, February 23, 2011, 8:40 PM
I may be interested in your transmission. I am curious about the Mazda MR02
because looks like the shifter position is different. I haven't found any
dimensional information yet, just wondering if anyone has stuffed one of these
in their Tiger.
On Wed, Feb 23, 2011 at 5:30 PM, mike schreiner <mikeflbmer@yahoo.com> wrote:
I didnt use that one, but I did take a Mustang 5.0 five speed and swapped tail
housings and shifter plate off a chevy S10 to bring the shifter forward and out
of the x frame...It is in the car and he shifter is slitly forward and center
of the orifg hole (could be tilted with an adapter spacer to bell housing to
bring it out orig shifter hole....I even have a fake T handle orig looking
shifter arm...I also made a second tranny like this to put on shelf as a
spare....I would sell it if interested (seeing as i am laid off) Ialso have a
posi rar end with low gera and left and right anti sway bars from a rotary
maxda track car...It will bolt right ina sunbeam...leaf springs and all...
Mike in Florida
--- On Wed, 2/23/11, Al Fudge <allfudge1635@gmail.com> wrote:
From: Al Fudge <allfudge1635@gmail.com>
Subject: [Tigers] Ford / Mazda 5speed transmission
To: tigers@autox.team.net
Date: Wednesday, February 23, 2011, 7:36 PM
All,
I'm thinking ahead a bit, but has anyone ever used the 5 speed MR02
transmission Mazda made for the Ford 88 to 96 small block in a Tiger? 1st
gear is a bit low at 3.75, but that might be OK with the stock rear end,
5th is .75
Al
B9471635
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/mikeflbmer@yahoo.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|