Hi:
The only thing I would change from this is what I did with my dash cover. I
did NOT punch the dash top cover for the tonneau cover lift-a-dot pins. These
holes tend to start cracks early on in the life of the dash cover. Instead I
replaced the inner screws that hold the defroster grills in place with
lift-a-dot pins and extended the tabs on the tonneau cover so that they
reached the new pin positions. Not original but it has worked without cracks
for 20 years. For concours you will have to go with what the factory did.
Godspeed Fast & Far
Jc
> 2. With a small drill, drill through the tonnoue pin holes such that you
can
> push a small pin or nail up through the bottom.
>
> 6. Poke the pins up from the bottom to locate the holes, reinstall the
> tonnue pins, the defroster slot grills, etc.
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|