Looking at the nice color drawing more closely it looks like Red goes
to 3 and Brown to 2. I'm not blind, I just can't see.
On Wed, 02 Feb 2011 15:17:46 -0700, Bob Dixon <bobdixon@frii.com>
wrote:
> Thanks for the details. I have a hard copy of the Rootes Factory
> Workshop Manual and that is what I was going off of. The color diagram
> on the Tigers United page does not seem to indicate which terminals on
> the switch to attach the wires so it didn't help me even though it is
> pretty.
>
> I just wanted to make sure I understood how it works. I'll Ohm out my
> switch tonight to see which terminals connect to what at the different
> position of the switch. I'm not confident the correct switches were
> with my Tiger when I got it.
>
> Since it doesn't seem to be explained anywhere I can find, is one of
> the wires grounded in one position and the other wire grounded in the
> second postion? Or, is one of the wires grounded in one position and
> both wires grounded in the second position. These switches seem to
> allow either way.
>
> I'll do some experimenting tonight.
>
> Thanks,
> Bob
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|