Duke -
As other have said you have to knock out one or more of the baffles in
the
covers. I have not tried the magnums, but with the shaft rockers I could
get
them to fit with just a second gasket. The Shaft Rockers are lower
profile a bit
then the stud mount but they get into the cover at the ends
where the shaft is
bolted on. I like the old chrome jobs too ;)
Sandy
________________________________
From: Samouce's <wsamouce@kc.rr.com>
To:
tigers@autox.team.net
Sent: Tue, February 1, 2011 9:47:20 AM
Subject: [Tigers]
Roller Rockers and Chrome Valve Covers
Hello all,
Hunkered down during the
blizzard outside. Getting ready to go in the
garage an polish the hard top
pad marks out of my paint.
Anyway.... I have AFR 185 aluminum heads with COMP
Cams Pro Magnum Rocker
Arms which are chromemoly steel and are a smaller
profile that aluminum
roller rockers. I really, really want to use my chrome
valve covers with
them. Tom Hall has a 1/4 spacer that I plan on using
between the VCs and
the heads.
Question - has anyone out there been
successful with chrome valve covers and
roller rockers?
TIA!
Duke
382002037
_______________________________________________
Tigers@autox.team.net
Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/sganz@pacbell.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|