Denis
There are 2 possible configurations.
Early configuration:
Hose - C3DE-6A664-A this hose has 1 right angle bend
Hose clips - 97331-S 2 single wire Corbin type clamps
PCV valve - C3TZ-6A666-A PCV valve with threaded fitting
Adaptor - 378754 brass right angle adaptor for hose and threaded for
the PCV valve
Adaptor - 378766-S valve cover rubber grommet
Later configuration; I believe this started with the later B19KC engine
group but have not confirmed this.
Hose - this hose has 2 right angle bends
PCV valve - this valve has a push on hose fitting
Valve cover grommet - NPD# - 6A892-1
PCV Hose - 6A664-1A has 2 bends but could be cut for the early
configuration
PCV valve
Early May not be available any more
Later - 6A666-2 this valve is also referred to as an EV-8
PCV right angle adaptor - 6A706-1A this should work but I can not tell from
the picture
Hose clamps - 6A664-2K you can also find this clamp at a Hardware store
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Mercier Denis
Sent: Wednesday, January 12, 2011 9:10 AM
To: tigers@autox.team.net
Subject: [Tigers] PCV valve
Hi Listers.
I'm looking on the National Parts Depot catalog for PCV valve and grommet.
Is someone can tell me wichone i have to buy for my Tiger with original
valve cover ?
Thanks !
Denis.
MK1A
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3373 - Release Date: 01/11/11
07:34:00
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|