I have purchased that one from them from Speedway. Works fine with the
Edelbrock
and other later pumps, don't know about anything early or iron.
They are
commonly available from summit, edelbrock, etc. They usually come
with the front
seal but not the timing pointer.
Sandy
----- Original
Message ----
From: Bob Hokanson <tgrrr@peoplepc.com>
To: Tigers
<tigers@autox.team.net>; "Rense, Mark (GE Indust, ConsInd)"
<mark.rense@ge.com>
Sent: Tue, August 10, 2010 8:40:03 PM
Subject: Re:
[Tigers] 260 Timing Cover Needed
Maybe something like this?
http://www.speedwaymotors.com/302-351W-Ford-Timing-Cover,1897.html
-----
Original Message ----- From: "Rense, Mark (GE Indust, ConsInd)"
<mark.rense@ge.com>
To: <tigers@autox.team.net>
Sent: Tuesday, August 10, 2010
11:31 AM
Subject: [Tigers] 260 Timing Cover Needed
> I'm just finishing up
balancing this five-bolt 332 stroker and will need
> a new timing cover
(C4OE-6059A) for the old girl. I had planned on using
> the one off the old
260 but now I'm looking at different timing (pun not
> intended) for this
swap. So, if anyone has a decent one kicking around
> or knows a source for a
new one please let me know. There are a few on
> ePay but I thought I'd ask
here first.
>
> Thanks,
> Bugz
_______________________________________________
Tigers@autox.team.net
Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/sganz@pacbell.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|