yes the rubber mounts. the brackets are to find and at least one is
tiger specific I think. someone made nice non stock looking repros of
them recently.
On Tuesday, August 3, 2010, <CoolVT@aol.com> wrote:
>
>
>
>
>
> To the engine.
>
>
> In a message dated 8/3/2010 6:03:55 P.M. Eastern Daylight Time,
> mcdangerous@verizon.net writes:
> Are you
> guys talking about the mounts that bolt to the engine, or the
> brackets that
> mount to the body? Thanks. M
>
>
> On 8/3/10 5:46 PM, "Owain
> Lloyd" <owain.lloyd@gmail.com> wrote:
>
>> I use the ones from
> rick. is there a problem with them?
>>
>> On Tuesday, August
> 3, 2010, <CoolVT@aol.com> wrote:
>>> Mine from NAPA were
> labeled China. I'm pretty sure the ones I ordered from
>>> the
> Mustang dealer were TRW's and they were from China. I think the
> only
>>> good ones are cross bolted. They sell for $100+.
> Anything in the $20-$50
>>> range are going to be China made and
> not cross bolted. I drilled an
>> bolted
>>>
> mine.
>>> M
>>>
>>>
>>> In a message dated
> 8/3/2010 5:26:52 P.M. Eastern Daylight Time,
>>>
> tkparker1941@gmail.com writes:
>>>
>>> Mark,
>>>
>
>>> The ones I bought from NAPA were labeled 82220 & 82221
> The implication
>> (Not
>>> the same as "fact") was they were
> from the same supplier TRW uses. As to
>>> the
>>>
> accuracy, they fit, the thickness seemed to be the same, not that I
> knew
>>> enough to look closely. No guarantees from me!, just my
> personal
>>> experience.
>>>
>>>
>>>
> Tom
>>>
>>> On Tue, Aug 3, 2010 at 4:49 PM,
> <CoolVT@aol.com> wrote:
>>>
>>>> *
>>>>
>
>>>>
>>>> It's easy to find them, but harder to
> find some that are decent. Most are
>>>> coming from
> China. I tried a few sets including some from NAPA.
> One
>>> set
>>>> was off by 1/2" in thickness. With another
> set the mounting bolts were
>>> off
>>>> by
> 3/4'. I ended up with a set that was close....off in thickness
> by
>>>> 1/16". I used a metal shim to match them
> up.
>>>> Mark
>>>> *
>>>>
>
>>>> In a message dated 8/3/2010 4:40:02 P.M. Eastern
> Daylight Time,
>>>> tkparker1941@gmail.com
> writes:
>>>>
>>>> NAPA carries them. Early Mustang V8.
> Also NPD.
>>>>
>>>> Tom
>>>>
>
>>>> On Tue, Aug 3, 2010 at 3:35 PM, Joel Martin
> <jmartiniii@yahoo.com> wrote:
>>>>
>>>>> Does
> anyone have a source for the TRW motor mounts?
>>>>>
>
>>>>> The TRW numbers are
>>>>> 82220 for
> the left and 82221 for the right.
>>>>>
> Thanks
>>>>> martjr
>>>>>
> _______________________________________________
>>>>>
> Tigers@autox.team.net
>>>>> Donate:
> http://www.team.net/donate.html
>>>>> Archive:
> http://www.team.net/archive
>>>>> Forums:
> http://www.team.net/forums
>>>>>
> Unsubscribe/Manage:
>>>>>
> http://autox.team.net/mailman/options/tigers/tkparker1941@gmail.com
>>>>
> _______________________________________________
>>>>
> Tigers@autox.team.net
>>>> Donate:
> http://www.team.net/donate.html
>>>> Archive:
> http://www.team.net/archive
>>>> Forums:
> <http://www.team.net/forums>
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|