The ground wire on many of the gauges is looped from one gauge to the
next. If the ground wire is loose at the end, all of those gauges could stop
working.
Also a fuse making bad contact would create the same symptoms. I had that
problem, cleaned up the fuses and fuse contacts and problem went away.
I think the most likely is the fuse problem unless you've been messing
around under the dash lately.
Mark L
In a message dated 7/28/2010 7:22:34 A.M. Eastern Daylight Time,
allanballard@att.net writes:
Three gauges quit working yesterday - fuel, temp and tach.
They were on and off for a while, then off.
I checked the fuse box but found nothing loose and no bad fuse.
Is there another central location for a loose wire or short to cause the
three
gauges to stop working?
Thanks in advance,
Allan Ballard
Mk1a Tiger
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/coolvt@aol.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|