tigers
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Tigers] "POS" carb

from [Allan Ballard] [Permanent Link][Original]
To: "Rense, Mark \(GE Indust, ConsInd\)" <mark.rense@ge.com>
Subject: Re: [Tigers] "POS" carb
From: Allan Ballard <allanballard@att.net>
Date: Mon, 19 Jul 2010 15:52:05 -0400 
My Edelbrock F4B manifold has the center piece of the area for "carburetor
barrels" lowered a bit.

I read that this will add 6 or 7 BHP...

When installing the carb, does the spacer also need to have the center section
removed or does the spacer configuration make no difference?

Allan
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Tigers] re-locating the starter solenoid, Allan Ballard
Next by Date:  Re: [Tigers] re-locating the starter solenoid, Tom Parker
Previous by Thread:  Re: [Tigers] "POS" carb, Rense, Mark (GE Indust, ConsInd)
Next by Thread:  Re: [Tigers] "POS" carb, Steve Laifman
Indexes:  [Date] [Thread] [Top] [All Lists]