Michael,
I'm not aware of the Datsun pickup application but probably the most popular
dual circuit MC for a Tiger is the one off the Mazda B3000 pickup truck.
This truck was also sold in the US as a Ford Courier. It works great with a
stock Tiger. However if you've changed to much larger calipers then
something larger like the Subaru or Datsun may be needed. However the longer
the MC, the harder it is to fit into the allowable space.
Buck Trippel
----- Original Message -----
From: "michael king" <michael.s.king@gmail.com>
To: "Joe Parlanti" <Parlanti@comcast.net>
Cc: <AAAGLASSS@aol.com>; <tigers@autox.team.net>
Sent: Wednesday, July 07, 2010 6:30 AM
Subject: Re: [Tigers] Master Cylinder Question
> Its the 260Z datsun one isnt it? IIRC Dale used to sell them.. i know
> there
> is a datsun pickup one that can be used and the subaru.. then there was
> someone who had worked out a wilwood that could be used.
>
> On 7 July 2010 22:38, Joe Parlanti <Parlanti@comcast.net> wrote:
>
>> I'm running one from a late '70s Datsun Z. The front and rear circuits
>> can
>> be separated, or joined through a proportioning valve. I can get a number
>> off of the part if no one else has it.
>>
>> Joe Parlanti
>> B382000026
>>
>>
>> Snip...
>> _______________________________________________
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|