The Rootes Parts manual shows the same part number for the generator arm and
the alternator arm.
6100022 Arm Adjusting LHD C4JZ-10145-A Tiger only part looking at
that Ford part number
6100022 Arm Adjusting Alternator
That surprises me but I don't have both these arms to compare.
6100024 Fan belt Generator LHD C2OZ-8620-E
6100853 Fan Belt Alternator
The alternator belt is different and I don't know the length of either belt.
I would suggest that you hook up the arm to the alternator, adjust to the
lowest position and measure the length around all the pulleys then buy a
belt close to that length. If you can adjust the alternator for tension on
the belt your done.
I went through several iteration of belts when I did my alternator
conversion until I got a belt that worked correctly for me. The guy at the
parts store was patient with me. I told him what I was doing and he
exchanged the belts and cash differences with a smile.
Ron Fraser
-----Original Message-----
From: Would U. Believe [mailto:mcdangerous@verizon.net]
Sent: Saturday, June 12, 2010 6:42 PM
To: CoolVT@aol.com; rfraser@bluefrog.com; tigers@Autox.Team.Net
Subject: Alternator Adjustment Arm / Fan Belt
Thanks. I actually have the bracket that the alternator mounts to. This is
a Tiger 2 only part. What I think I don't have is the right arm that bolts
between the water pump and the bottom of the alternator. This is the one
that lets you tighten the fan belt. I wonder if my problem is that my fan
belt is too long. Anyone know the correct or usable length of the fan belt?
Thanks.
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|