Is your block fitted with roller lifters? If not, then the B303 (or any other
roller cam) will not work for you...
If you don't have a roller block, then consider either changing to a newer
block or else getting one of Crane's (or others) roller lifter cam kits for
early blocks. You'll have less problems using low-additive oils and make more
power to boot.
Theo
> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-
> bounces@autox.team.net] On Behalf Of Gyroplanes@aol.com
> Sent: June 10, 2010 9:31 AM
> To: tigers@autox.team.net
> Subject: [Tigers] Now what do I do?
>
> Hi Everyone,
<snip>
>
> I bagged the 260 and bought the recommended 1984 302 (non EFI &
> Computer)
>
<snip>
>
> Thanks in advance,
> Tom Milton
> Lansing, IL.
-----------------------------------------------------------------------------
---
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.
Thank you for your cooperation.
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|