Hey,
I recently bought some upper ball joints from Sunbeam Specialties and I have
a couple of questions. The shop manual shows a circlip that snaps into a
groove after you press the ball joint into the A-arm. These clips didn't
come with the ball joints. Is this a common item I should be able to get
locally? Second question: The large end of the rubber boot is held in
place by a wire ring but there is nothing on the small end. There is a
groove in the rubber on the small end like it is made for some type of clip.
When I shot some grease into the ball joint it started oozing out from under
the boot on the small end. Should I have some type of clip on that end of
the boot?
Thanks,
Joe Brown
Arlington, TX
B382000217
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|